Enhancing runway durability with Petromat Enviro

Overview

The Altoona-Blair County Airport, a regional airport in central PA, faced a safety concern with one of its runways. Reflective cracking had occurred due to harsh freeze/thaw conditions during winter months. The daily impact on the airport pavements caused fatigue in the surface layer, making them vulnerable to further damage from moisture infiltration and traffic loading.

Challenge

To address this issue, the project engineer recommended using paving interlayer fabrics to extend the design life of flexible pavement runways. However, they had never specified a sustainable asphalt paving interlayer fabric. A suitable solution was found in Petromat Enviro™, a paving fabric designed to be easily recycled by milling it into small pieces. This fabric effectively mitigates stress and moisture on runways, taxiways, and aprons, ensuring the preservation of pavements for smoother take-offs and landings.

Solution

To implement the solution, half of the existing runway wearing surface was milled off, and Petromat Enviro was directly installed on the milled surface. Petromat Enviro has optimal elongation, enabling its installation without a leveling course.

Finally, a 2-inch (5.08 cm) finished surface course was applied directly on top of the Petromat Enviro. The installation of 20,000 yd² (16,722 m²) was completed with ease.

Explore more case studies

View all

14 September 2026

Lake bank stabilization at Vivid Shores

At Vivid Shores in Bonita Springs, Florida, PROPEX® Armormax®, MIRAFI® FW403 and MIRAFI 140N stabilize lake banks exposed to wind-driven wave erosion. Completed sections are performing as designed.

14 September 2026

Crowne point country club case study

Crowne Point Country Club rehabilitated a deteriorated Vermont access road with MIRAFI H2Ri, using active moisture management to address saturated soils, frost-related distress and subgrade instability.

23 August 2026

GSE HD geomembrane lined salt ponds ensure long-term brine containment

GSE® HD geomembrane lined over 3.4 million m² of evaporation ponds to prevent brine seepage under extreme heat and UV exposure. This continuous barrier eliminated salt discharge and protected the surrounding environment.