Ground stabilization with MIRAFI RSi at Puerto Peñasco solar farm

Overview

During the construction of a solar farm in Puerto Peñasco, Mexico, trucks consistently became stuck in the sandy, poorly graded soil. To address the low bearing capacity of the ground, a solution was implemented involving the integration of MIRAFI^® RS580i geotextile with a 10 in (25 cm) layer of mixed sand and gravel.

MIRAFI RS580i was selected for its high tensile strength and excellent load distribution properties. When combined with the gravel mixture, it significantly improved the soil’s load-bearing capacity, allowing heavy trucks and construction equipment to operate without getting stuck.

Challenge

Soil excavation and replacement were considered as alternative solutions, but both options were more expensive and time-consuming. In contrast, MIRAFI RS580i provided an efficient and cost-effective way to enhance the existing sandy soil.

The use of geosynthetics also reduced the need for extensive earthwork, which led to additional savings by minimizing equipment and labor demands. Furthermore, by avoiding the removal and replacement of large volumes of native sand, the project reduced waste generation and environmental impact. The geosynthetic solution also supports sustainability by delivering long-term performance while conserving natural resources compared to traditional construction methods.

Solution

The integration of MIRAFI RS580i delivered multiple benefits, including improved load-bearing capacity, enhanced site stability, increased durability, cost savings, and a lower environmental footprint. This approach effectively resolved the challenges presented by the site’s sandy soil and supported smooth progress throughout the construction phase.

The geosynthetic layer contributes to long-term stability and durability, safeguarding the solar farm from potential settlement or ground deformation. As a result, the overall lifespan of the project has been extended, making MIRAFI RS580i a critical component in the site’s successful and sustainable development.

Installation of MIRAFI® RS580i beneath a 25 cm gravel layer to stabilize sandy soils at the Puerto Peñasco solar farm site.

Heavy trucks and construction equipment operating safely on stabilized ground reinforced with MIRAFI® RS580i.

Geosynthetic solution reducing excavation needs and improving long-term site performance for sustainable solar farm construction.

Explore more case studies

View all

14 September 2026

Lake bank stabilization at Vivid Shores

At Vivid Shores in Bonita Springs, Florida, PROPEX® Armormax®, MIRAFI® FW403 and MIRAFI 140N stabilize lake banks exposed to wind-driven wave erosion. Completed sections are performing as designed.

14 September 2026

Crowne point country club case study

Crowne Point Country Club rehabilitated a deteriorated Vermont access road with MIRAFI H2Ri, using active moisture management to address saturated soils, frost-related distress and subgrade instability.

23 August 2026

GSE HD geomembrane lined salt ponds ensure long-term brine containment

GSE® HD geomembrane lined over 3.4 million m² of evaporation ponds to prevent brine seepage under extreme heat and UV exposure. This continuous barrier eliminated salt discharge and protected the surrounding environment.